|
Accessories and options for gear units / gearmotors
Flexibility and design diversity
TorqLOC® hollow shaft mounting system
Optional for parallel shaft helical, helical-bevel and
helical-worm gear units. The TorqLOC ® hollow
shaft mounting system is used for achieving a non-positive
connection between the customer's shaft and the hollow
shaft in the gear unit. As a result, the TorqLOC ®
hollow shaft mounting system is an alternative to the
existing hollow shaft with shrink disk, hollow shaft with
key and the splined hollow shaft. The TorqLOC ®
hollow shaft mounting system provides the advantages of easy
installation and de-installation, and saving costs.
OS surface protection
Instead of the standard surface protection, motors and gear
units may be ordered with the optional surface protection
OS1 to OS4. In addition to that, we can carry out special
procedure Z. Special procedure Z means that large surface
recesses are sprayed with a rubber filling prior to coating.
|
|
|
|
|
|
|
|
|
1 × Dip primer
1 × One-pack topcoat
|
|
- Normal ambient conditions
- Relative humidity below 90%
- Surface temperature up to 120 °C
- Corrosivity category C1 (German industrial
standard DIN EN ISO 12 944-2)
|
|
|
1 × Dip primer
1 × Two-pack base coat
1 × Two-pack topcoat
|
|
- Low environmental impact
- Relative humidity max. 95%
- Surface temperature up to 120 °C
- Corrosivity category C2 (German industrial
standard DIN EN ISO 12 944-2)
|
|
|
1 × Dip primer
2 × Two-pack base coat
1 × Two-pack topcoat
|
|
- Medium environmental impact
- Relative humidity max. 100%
- Surface temperature up to 120 °C
- Corrosivity category C3 (German Industrial
Standard DIN EN ISO 12 944-2)
|
|
|
1 × Dip primer
2 × Two-pack base coat
2 × Two-pack topcoat
|
|
- High environmental impact
- Relative humidity max. 100%
- Surface temperature up to 120 °C
- Corrosivity category C4 (German industrial
standard DIN EN ISO 12 944-2)
|
|
|
1 × Dip primer
2 × Two-pack base coat
2 × Two-pack topcoat
|
|
- Very high environmental impact
- Relative humidity max. 100%
- Surface temperature up to 120 °C
- Corrosivity category C5 (German industrial
standard DIN EN ISO 12 944-2)
|
|
|
|
|
|
One-pack topcoat (water-based)
|
|
|
Two-pack base coat (polyurethane)
|
|
|
Two-pack base coat (epoxy resin combination)
|
|
|
Two-pack topcoat (polyurethane)
|
|
Send us an email
Send us a fax
Call us