|
|
 |
| |
|
|
|
|
| |
The BOXER diaphragm pumps are known for their high performance, power and sturdiness that make them suitable for pumping fluid with a very high apparent viscosity, of up to 50.000 cps (at 20° C) even when suspended solid parts are present.
The dry suction capacity from considerable suction heights when the pump is not flooded, together with the possibility to fine-tune the speed without a loss in pressure, flow rate and head, and the possibility of loadless operation without causing any damage, make these pumps extremely versatile.
The vast choice of composition materials allows you to determine the best chemical compatibility with the fluid and/or the environment without neglecting the temperature aspect. Their construction makes them particularly suitable for severe environments with high humidity or in potentially explosive environments (ATEX certification). |
|
 |
|
| |
|
| |
Main features
executions in: Polypropylene, PVDF/ECTFE, Aluminium, AISI 316
use in explosive atmospheres (ATEX certification);
suitable for severe environments and with high humidity;
dry operation;
dry self-priming;
supply with non-lubricated air;
adjustable flow rate and head;
fine-tuning of the speed at constant pressure;
possibility of twin manifolds (two separate intakes and deliveries);
bench or ceiling installation;
three delivery and intake positions
ease of maintenance and replacement of parts;
very good performance/cost ratio.
Description
Diaphragm pumps are composed of a coaxial centrally housed pneumatic motor, with new generation diaphragms (Long Life profile) fixed to the shaft. At the two ends, the two pump bodies house the ball valves and the relative seats of the product intake and delivery ducts. |
| |
|
|
|
|
| |
|
| |
Diaphragm pump Microboxer
in PP, ECTFE, Alu e AISI 316
Standard version: II 3/3G c IIB T 135°C (for Zone 2)
Conduct version: II 2/2GD c IIB T 135°C (for Zone 1)
Microboxer Alu
Featuring uncomplicated and quick maintenance, easily replaceable
components, the Microboxer diaphragm pumps are fed by non-lubricated air and have adjustable delivery and head.
In the Conduct version, their explosion-proof characteristics have been certified to the Atex 94/0/EC Machinery
Directive.
Other technical advantages include speed fine tuning while maintaining pressure high, splittable
manifolds, possibility of mounting the fittings in three different positions on the intake or delivery side.
Furthermore, these air diaphragm pumps can run dry without any problem and are equipped with a patented internal exchanger coaxial to the
shaft.
Other versions
Microboxer in PP
Microboxer in ECTFE
Microboxer in Aisi 316
Chemical compatibility
The type of fluid, its temperature and the location are important to establish the correct pump construction materials and their chemical compatibility
|
|
 |
|
| |
|
|
|
|
| |
|
| |
Diaphragm pump Miniboxer
in PP, ECTFE and AISI 316 stainless steel
Standard version: II 3/3G c IIB T 135°C (for Zone 2)
Conduct version: II 2/2GD c IIB T 135°C (for Zone 1)
Miniboxer in AISI 316Featuring uncomplicated and quick
maintenance, easily replaceable components, the Miniboxer diaphragm pumps are fed by non-lubricated air and have adjustable delivery and head.
In the Conduct version, their explosion-proof characteristics have been certified to the Atex 94/0/EC Machinery
Directive.
Other technical advantages include speed fine tuning while maintaining pressure high, splittable
manifolds, possibility of mounting the fittings in three different positions on the intake or delivery side.
Furthermore, these air diaphragm pumps can run dry without any problem and are equipped with a patented internal exchanger coaxial to the
shaft.
Other versions
Miniboxer in PP
Miniboxer in ECTFE
Chemical compatibility
The type of fluid, its temperature and the location are important to establish the correct pump construction materials and their chemical compatibility
|
|
 |
|
| |
|
|
|
|
| |
|
| |
Diaphragm minipump MidgetBox
in PP
Standard version: II 3/3G c IIB T 135°C (for Zone 2)
Conduct version: II 2/2GD c IIB T 135°C (for Zone 1)
Midgetbox in PPFeaturing uncomplicated and quick
maintenance, easily replaceable components, the MidgetBox diaphragm pumps are fed by non-lubricated air and have adjustable delivery and head.
In the Conduct version, their explosion-proof characteristics have been certified to the Atex 94/0/EC Machinery
Directive.
Other technical advantages include speed fine tuning while maintaining pressure high, splittable
manifolds, possibility of mounting the fittings in three different positions on the intake or delivery side.
Furthermore, these air diaphragm pumps can run dry without any problem and are equipped with a patented internal exchanger coaxial to the
shaft.
Chemical compatibility
The type of fluid, its temperature and the location are important to establish the correct pump construction materials and their chemical compatibility
|
|
 |
|
| |
|
|
|
|
| |
|
| |
Diaphragm pump Boxer 80
in AISI 316 stainless steel
Standard version: II 3/3G c IIB T 135°C (for Zone 2)
Conduct version: II 2/2GD c IIB T 135°C (for Zone 1)
Boxer 80 in AISI 316
Featuring uncomplicated and quick maintenance, easily replaceable components, the Boxer 80 diaphragm pumps are fed by non-lubricated air and have adjustable delivery and head.
In the Conduct version, their explosion-proof characteristics have been certified to the Atex 94/0/EC Machinery Directive.
Other technical advantages include speed fine tuning while maintaining pressure high, splittable manifolds, possibility of mounting the fittings in three different positions on the intake or delivery side. Furthermore, these air diaphragm pumps can run dry without any problem and are equipped with a patented internal exchanger coaxial to the shaft.
Chemical compatibility
The type of fluid, its temperature and the location are important to establish the correct pump construction materials and their chemical compatibility |
|
 |
|
| |
|
|
|
|
| |
|
| |
Diaphragm pump Boxer 81
in PP, ECTFE and aluminium
Standard version: II 3/3G c IIB T 135°C (for Zone 2)
Conduct version: II 2/2GD c IIB T 135°C (for Zone 1)
Boxer 81 in AluFeaturing uncomplicated and quick
maintenance, easily replaceable components, the Boxer 81 diaphragm pumps are fed by non-lubricated air and have adjustable delivery and head.
In the Conduct version, their explosion-proof characteristics have been certified to the Atex 94/0/EC Machinery
Directive.
Other technical advantages include speed fine tuning while maintaining pressure high, splittable
manifolds, possibility of mounting the fittings in three different positions on the intake or delivery side.
Furthermore, these air diaphragm pumps can run dry without any problem and are equipped with a patented internal exchanger coaxial to the
shaft.
Chemical compatibility
The type of fluid, its temperature and the location are important to establish the correct pump construction materials and their chemical compatibility
|
|
 |
|
| |
|
|
|
|
| |
|
| |
Diaphragm pump Boxer 100
in PP e ECTFE
Standard version: II 3/3G c IIB T 135°C (for Zone 2)
Conduct version: II 2/2GD c IIB T 135°C (for Zone 1)
Boxer 100 in ECTFEFeaturing uncomplicated and quick
maintenance, easily replaceable components, the Boxer 100 diaphragm pumps are fed by non-lubricated air and have adjustable delivery and head.
In the Conduct version, their explosion-proof characteristics have been certified to the Atex 94/0/EC Machinery
Directive.
Other technical advantages include speed fine tuning while maintaining pressure high, splittable
manifolds, possibility of mounting the fittings in three different positions on the intake or delivery side.
Furthermore, these air diaphragm pumps can run dry without any problem and are equipped with a patented internal exchanger coaxial to the
shaft.
Chemical compatibility
The type of fluid, its temperature and the location are important to establish the correct pump construction materials and their chemical compatibility
|
|
 |
|
| |
|
|
|
|
| |
|
| |
Diaphragm pump Boxer 150
in PP, ECTFE, alluminio e acciaio AISI 316
Standard version: II 3/3G c IIB T 135°C (for Zone 2)
Conduct version: II 2/2GD c IIB T 135°C (for Zone 1)
Boxer 150 in AluFeaturing uncomplicated and quick
maintenance, easily replaceable components, the Boxer 150 diaphragm pumps are fed by non-lubricated air and have adjustable delivery and head.
In the Conduct version, their explosion-proof characteristics have been certified to the Atex 94/0/EC Machinery
Directive.
Other technical advantages include speed fine tuning while maintaining pressure high, splittable
manifolds, possibility of mounting the fittings in three different positions on the intake or delivery side.
Furthermore, these air diaphragm pumps can run dry without any problem and are equipped with a patented internal exchanger coaxial to the
shaft.
Other versions
Boxer 150 in PP
Boxer 150 in ECTFE
Boxer 150 in AISI 316
Chemical compatibility
The type of fluid, its temperature and the location are important to establish the correct pump construction materials and their chemical compatibility
|
|
 |
|
| |
|
|
|
|
| |
|
| |
Diaphragm pump Boxer 250
in PP e ECTFE
Standard version: II 3/3G c IIB T 135°C (for Zone 2)
Conduct version: II 2/2GD c IIB T 135°C (for Zone 1)
Boxer 250 in PPFeaturing uncomplicated and quick
maintenance, easily replaceable components, the Boxer 250 diaphragm pumps are fed by non-lubricated air and have adjustable delivery and head.
In the Conduct version, their explosion-proof characteristics have been certified to the Atex 94/0/EC Machinery
Directive.
Other technical advantages include speed fine tuning while maintaining pressure high, splittable
manifolds, possibility of mounting the fittings in three different positions on the intake or delivery side.
Furthermore, these air diaphragm pumps can run dry without any problem and are equipped with a patented internal exchanger coaxial to the
shaft.
Other versions
Boxer 250 in ECTFE
Chemical compatibility
The type of fluid, its temperature and the location are important to establish the correct pump construction materials and their chemical compatibility
|
|
|
|
| |
|
|
|
|
| |
|
| |
Diaphragm pump Boxer 251
in alluminio e acciaio AISI 316
Standard version: II 3/3G c IIB T 135°C (for Zone 2)
Conduct version: II 2/2GD c IIB T 135°C (for Zone 1)
Boxer 251 in AluFeaturing uncomplicated and quick
maintenance, easily replaceable components, the Boxer 251 diaphragm pumps are fed by non-lubricated air and have adjustable delivery and head.
In the Conduct version, their explosion-proof characteristics have been certified to the Atex 94/0/EC Machinery
Directive.
Other technical advantages include speed fine tuning while maintaining pressure high, splittable
manifolds, possibility of mounting the fittings in three different positions on the intake or delivery side.
Furthermore, these air diaphragm pumps can run dry without any problem and are equipped with a patented internal exchanger coaxial to the
shaft.
Other versions
Boxer 251 in AISI 316
Chemical compatibility
The type of fluid, its temperature and the location are important to establish the correct pump construction materials and their chemical compatibility
|
|
 |
|
| |
|
|
|
|
| |
|
| |
Diaphragm pump Boxer 502
in PP e PVDF
Standard version: II 3/3G c IIB T 135°C (for Zone 2)
Conduct version: II 2/2GD c IIB T 135°C (for Zone 1)
Boxer 502 in PPFeaturing uncomplicated and quick
maintenance, easily replaceable components, the Boxer 502 diaphragm pumps are fed by non-lubricated air and have adjustable delivery and head.
In the Conduct version, their explosion-proof characteristics have been certified to the Atex 94/0/EC Machinery
Directive.
Other technical advantages include speed fine tuning while maintaining pressure high, splittable
manifolds, possibility of mounting the fittings in three different positions on the intake or delivery side.
Furthermore, these air diaphragm pumps can run dry without any problem and are equipped with a patented internal exchanger coaxial to the shaft
Other versions
Boxer 502 in PVDF
Chemical compatibility
The type of fluid, its temperature and the location are important to establish the correct pump construction materials and their chemical compatibility
|
|
 |
|
| |
|
|
|
|
| |
|
| |
Diaphragm pump Boxer 503
in PP e PVDF
Standard version: II 3/3G c IIB T 135°C (for Zone 2)
Conduct version: II 2/2GD c IIB T 135°C (for Zone 1)
Boxer 503 in PPFeaturing uncomplicated and quick
maintenance, easily replaceable components, the Boxer 503 diaphragm pumps are fed by non-lubricated air and have adjustable delivery and head.
In the Conduct version, their explosion-proof characteristics have been certified to the Atex 94/0/EC Machinery
Directive.
Other technical advantages include speed fine tuning while maintaining pressure high, splittable
manifolds, possibility of mounting the fittings in three different positions on the intake or delivery side.
Furthermore, these air diaphragm pumps can run dry without any problem and are equipped with a patented internal exchanger coaxial to the
shaft.
Other versions
Boxer 503 in PVDF
Chemical compatibility
The type of fluid, its temperature and the location are important to establish the correct pump construction materials and their chemical compatibility
|
|
 |
|
| |
|
| |
|
|
|
|
| |
|
| |
| Version |
Micro
Boxer |
Mini
Boxer |
Boxer
50 |
Boxer
80 |
Boxer
81 |
Boxer
100 |
Boxer
150 |
Boxer
250 |
Boxer
251 |
Boxer
502 |
Boxer
503 |
| Suction/delivery ports (inches) |
G ½ |
G ½ |
G ½ |
G 1 |
G 1 |
G 1 |
G 1 ¼ |
G 1 ½ |
G 1 ½ |
G 2 |
G 3 |
| Air port (inches) |
G ¼ |
G½ |
G ½ |
G ½ |
G ½ |
G ½ |
G ½ |
G ½ |
G ½ |
G ½ |
G ½ |
| Max dry suction capacity (m) (*) |
5 |
5 |
5 |
5 |
6 |
5 |
5 |
5 |
6 |
4 |
5 |
| Max delivery (l/min) |
30 |
50 |
50 |
90 |
100 |
150 |
220 |
340 |
340 |
650 |
850 |
| Max head (m) |
70 |
70 |
70 |
70 |
70 |
70 |
70 |
70 |
70 |
70 |
70 |
| Max air supply pressure (bar) |
7 |
7 |
7 |
7 |
7 |
7 |
7 |
7 |
7 |
7 |
7 |
| Max pass solid dia. (mm) |
2 |
3 |
4 |
4 |
4 |
4 |
5 |
6 |
6 |
8 |
10 |
| Net weight PP (kg) |
1,6 |
3,6 |
--- |
--- |
5 |
7,5 |
12 |
16 |
--- |
54 |
56 |
| Net weight ECTFE (kg) |
1,9 |
4,2 |
--- |
--- |
6,5 |
8,5 |
14 |
20 |
--- |
--- |
--- |
| Net weight Al (kg) |
--- |
--- |
4 |
--- |
6,5 |
--- |
16 |
--- |
21 |
--- |
--- |
| Net weight Aisi 316 (kg) |
--- |
6,5 |
--- |
10,5 |
--- |
--- |
21 |
--- |
32 |
--- |
--- |
| Net weight PVDF (kg) |
--- |
--- |
--- |
--- |
--- |
--- |
--- |
--- |
--- |
65 |
67 |
| Materials |
PP ECTFE Alu Aisi 316 |
PP ECTFE Aisi 316 |
Alu |
Aisi 316 |
Alu PP ECTFE |
PP ECTFE |
PP ECTFE Alu Aisi 316 |
PP ECTFE |
Alu Aisi 316 |
PP PVDF |
PP PVDF |
|
| |
|
 DEBEM
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
| |
|
|
|
Send us an email
Send us a fax
Call us