electric motors - brake motors - servomotors - single-phase electric motors - three-phase electric motors
 
SALE PROGRAM
=INDUSTRIAL EQUIPMENT=
 
 » industrial gearboxes
 » gearboxes mobile equipment
 » ball screws
 » bearings
 » brakes and clutches
 » brush
 » brushless motors
 » centrifugal fans
 » chucks
 » conveyor belts
 » electric motors
 » electromagnets
 » flights 
 » food components 
 » gear reducers
 » hose clamps
 » inverters
 » linear units
 » mechanical transmission
 » mechanical turning 
 » mechanical seals 
 » modular systems 
 » molded brake lining
 » pickling agent
 » plastics
 » pneumatic seals
 » racks
 » rollers for conveyors
 » suspension units 
 » screw jacks
 » selfaligning pillow blocks
 » servoactuators
 » automatic tighteners
 » speed variators
 » vibrators
 » welders
 » wheels for trolleys
 » generic articles 
=AUTOMOTIVE EQUIPMENT=
 
 » automotive bearings
 » automotive belts
 » battery chargers
 » beta tools
 » book kits
 » brake hoses
 » cabin air filters
 » chassis mounts
 » engine gaskets kits
 » head bolt kits
 » hydraulic jacks
 » idler pulley
 » oil seal
 » universal joint
 » valve stem seals
 » wheel bearing kits
 


 » ELECTRIC MOTORS BONFIGLIOLI
 
Motori Elettrici Bonfiglioli        Motori Elettrici Marelli        Motori Elettrici Mgm
 
  
BN: Three-phase motors bonfiglioli spa riduttori a gioco controllato
 
  
BC: DC electric motors bonfiglioli spa motoriduttori ad assi ortogonali
 
  
BS: Single-phase motors bonfiglioli spa riduttori a gioco controllato
 
  
BCS series DC servomotors bonfiglioli spa riduttori a gioco controllato
 
  
NFF: Clutch-Brake units bonfiglioli spa motoriduttori ad assi paralleli
 
 » ELECTRIC MOTORS
 
electric motors Bonfiglioli        electric motors Marelli        electric motors Mgm
 
 
A complete range of AC motors developed for gearmotor duty that will exceed expectations 

The IEC-normalized BN motors comply with all the applicable international standards, including the EMC and LV Directives. They are available in the 0.06 - 30 kW range in the foot and the flange mounting version, the latter in both the IM B5 and the IM B14 configuration. Single and dual pole version available with generally, three brake options offered, one DC and two AC supply, lending further flexibility to the system. Finally, all motors are inverter duty. 
 
  

BN series AC motors 

BN series AC motors


Type
kW
BN 56A
0,06
BN 56B
0,09
BN 63A
0,12
BN 63B
0,18
BN 63C
0,25
BN 71A
0,25
BN 71B
0,37
BN 71C
0,55
BN 80A
0,55
BN 80B
0,75
BN 80C
1,1
BN 90S
1,1
BN 90LA
1,5
BN 90LB
1,85
BN 100LA
2,2
BN 100LB
3
BN 112M
4
BN 132S
5,5
BN 132MA
7,5
BN 132MB
9,2
BN 160MR
11
BN 160M
15
BN 180M
18,5
BN 180L
22
BN 200L
30

  kW rating (4 pole)
0,06 kW ... 30kW

Frame Sizes
25 nos

Pole Numbers
2, 4, 6, 8, 2/4, 2/8, 2/12, 4/6, 4/8

Mounting Options
Foot IM B3
Flange Im B5 and IM B14

Operation
50 Hz and 60 Hz

Compliance
CEE 73/23 (LVD) and CEE 89/336 (EMC)

Inverter Duty 
All Frame Sizes

Housing
Cast Alluminium

Main Brake Features
DC and AC supply
Faster Brake Engage/Disengage through Electronically
Controlled AC/DC Rectifier type SB, NBR, SBR (option)

Main Options
Thermistors and Thermostates sensor
Separate Supply Forced Ventilation
Line Driver and Push-Pull Incremental Encoder
CSA and UL Approved Design

  
  
 » SALES CATALOGUE
 
  
 » OWNER'S MANUAL AND SPARE PARTS LIST
 
  
 » INSTALLATION, USE AND SERVICE MANUAL
 
  
  
  
A comprehensive range of permanent magnet DC motors 

The motors of the BC series are the simple, proven and economical solution to the requirements of DC drives. The materials and the design concepts exploited allow the use of BC motors under the severest duty and with 4-quadrants thyristor converters. Motors can be operated in the –20 to +40 °C temperature range and are IP54 protected and class F isolated.
 
  

BC series DC motors

BC series DC motors


Type
Torque Nm
BC 110
0,3
BC 120
0,8
BC 140
1,4
BC 220
0,9
BC 240
1,2
BC 270
2,2
BC 310
4,5

  Torque Range 
0,3 Nm ... 4,5 Nm

Speed
1.500, 2.000, 3.000 min-1

Supply
12, 24, 36, 48,65, 110, 180, Vdc

Configurations
IM B5 and IM B14 Flange Mount

Ventilation
BC110 ... BC140 non-ventilated
BC220 ... BC310 TEFC
  
 
 » SALES CATALOGUE
 
  
  
  
System advantage 

The NFF series is compact and easy to install, these units are completely closed (IP54 protection) and do not need any maintenance or adjustment of magnetic gap thanks to the special system for taking up any backlash caused by wear and tear.
 
  

NFF series Clutch-Brake Units

NFF series Clutch-Brake Units


Type
Torque Nm
NFF 07
8
NFF 09
15
NFF 11
30
NFF 14
75

  Torque Range
8 Nm ... 75 Nm

Max. Inputed Speed
3.000 min-1

Max. Work per each Braking
7 KJ ... 55 kJ

Max. Work per Hour
260 KJ/h ... 360 kJ/h

Max. Work between service
280 MJ ... 1220 MJ

Installation
Both Horiontal and Vertical Permitted

Input and Output Configuration
Both Solid and Hollow Shaft Available

Mounting Options:
Both Horiontal and Vertical Permitted


Foot Available 
IM B5 Flange Available 
IM B14 Flange Available 
  
 
 » COD. BC0054 - REV 0
 
  
 
  
The proven and valuable choice when it comes to DC servomotors 

The motors of the BCS series are of the permanent magnet type and will allow an approx. 400% peak torque over the rated torque.
The particular construction guarantees extreme smoothness in operation, even at low speed.
 
  

BCS series DC servomotors  

BCS series DC servomotors


Type
Torque Nm
BCS 10
0,05
BCS 20
0,4
BCS 30
0,9
BCS 40
1,4
BCS 50
1,5
BCS 60
3,0
BCS 70
4,5
BCS 80
7,7

  Locked Rotor Torque 
0,05 Nm ... 7,7 Nm

Speed
1.500, 2.000, 3.000, 4.000 min-1

Rated Voltage 
24 ... 180 Vdc

Momentary Peak Torque 
400/500% over LRT

Degree of Protection
IP54

Configurations
IM B5 and IM B14 Flange Mount

Options 
Failsafe DC Brake
Tacho-generator
 
  
 » COD. BCS 0009 - REV 3
 
  
 
  

BS series Single-phase induction motors




Type
Torque Nm
BS 56A
0,06
BS 56B
0,09
BS 63A
0,12
BS 63B
0,18
BS 71A
0,25
BS 71B
0,37
BS 80A
0,55
BS 80B
0,75
BS 90S
1,1
BS 90L
1,5

  kW ratings
0,06 … 1,5 kW

Frame sizes
56A to 90L

Poles
4

Mounting
Flange mounting IM B5 and IM B14

Frequency
50 and 60 Hz

European Norms
CEE 73/23 (LVD) and CEE 89/336 (EMC)

Housing
Cast Aluminium

Main options
Starting and run capacitors
Bimetal thermal protector
Balanced winding

 
  
 » SALES CATALOGUE
 
  
 » OWNER'S MANUAL
 
  
 
  
Brake motors 

MGM brake motors are asynchronous three-phase totally enclosed fan cooled motors. The motors brake in case of power supply failure ensuring further to a precise stop and a quick braking action. the security of a sudden intervention in case of an unintentional power supply failure (f.e. power supply blackout, equipment failure).

The braking action is obtained without axial sliding of the shaft and provides equal braking torque in both directions of rotation.

MGM brake motors are specially suitable to be used with lifting and translating machines, tooling machinery, automatic and transfer machinery in textile, ceramic and packing fields and in all situation where precision and quickness in braking are required, or to cut production cycles in fixed spaces and times 

Brake motors 

Brake motors 

Brake motors 
 
 
SMI MOTORS

SMI series is made up of three-phase asynchronous electric motors with integrated frequency converter. Power range is between 0,37 kW and 4 kW, while motor axis height is between 71 mm and 112 mm. Unit is made up of a high-efficiency three-phase asynchronous electric motor and a compact frequency inverter placed at the motor end opposite to the control end. The basic construction is closed, externally ventilated with IP 55 protection class. SMI motor offers a wide range of overload capacity and a high thermal reserve; the insulating materials are class F .

ELECTRIC MOTORS

 
 
send us an email

info@tecnicaindustriale.it
* send us a fax 

 +39 0805367091
call us  

 +39 080.5367090
 
 
 
 
Tecnica Industriale Srl
S.S. 98 Km 80.176 - 70026 Modugno (Ba) - Italy
Tel +39 0805367090 - Fax +39 0805367091
E-mail: info@tecnicaindustriale.it 
Attivo tutti i giorni dalle 9.00 alle 19.00
 
 
 




 

2003 - Tecnica Industriale Srl - all rights reserved - created by www.omnilink.it