INDUSTRIAL PRODUCTS



INDUSTRIAL EQUIPMENT

brevini planetary gearboxes
bonfiglioli gearboxes *
sew eurodrive gearmotors
siti gearboxes
lenze gearboxes
wittenstein alpha gearheads
motovario gear reducers
industrial gearboxes
gearboxes mobile equipment
industrial mixer
ball screws
bearings
brakes and clutches
brush
brushless motors
centrifugal fans
chucks
conveyor belts
electric motors
electromagnets
flights
marbett food components
gear reducers
hose clamps
industrial belts
industrial pumps
inverters
linear units
mechanical transmission
mechanical turning 
mechanical seals 
modular systems 
molded brake lining
pickling agent
plastics
pneumatic seals
racks
rollers for conveyors
suspension units 
screw jacks
selfaligning pillow blocks
servoactuators
automatic tighteners
speed variators
valves
vibrators
welders
wheels for trolleys
generic articles 

AUTOMOTIVE EQUIPMENT

www.powerparts.it
worldwide industrial supplies
 
* while supplies last



 
  Standard Gearmotors sew eurodrives
 
Geared torque motors


SEW torque motors are AC squirrel-cage motors designed to operate with rated torque at a standstill (starting torque). They are equivalent to springs with an unlimited spring travel.

Geared torque motors move flaps, gates, or switches. They move press dies into die change position. In all these cases, they serve as a drive in which a stop position must be reached and held following a short movement. While under voltage, they can also have their speed matched temporarily by another drive and then continue running under their own force.


Supply voltages and enclosures for SEW torque motors correspond to those of SEW AC motors.

The electrical version enables the torque motor to continuously operate with the permitted starting torque in rating I irrespective of the starting frequency.

The attainable starting torque is tripled when the torque motors are operated with rating II. This operation is either only permitted for short intervals (operating mode S3/15% cdf) or continuously with forced cooling of the torque motors.

The dimensions of the MT/MV torque motors are identical to those of DT/DV AC motors of the same size (see also the "Gearmotors" catalog).

Torque gearmotors are assembled using a modular concept just like gearmotors. Since torque motors develop less torque in comparison to AC squirrel-cage motors of the same design due to thermal conditions, there is a greater range of possible combinations with gear units.

Torque motors 750 rpm 50 Hz

 
Rating I for continuous duty S1
Rating II for intermittent operation S3/15% cdf or continuous duty with forced cooling fan
Only for gear unit mounting
Type
Ma mot [Nm]
cos ϕA
Ia at 400 V ±10% [A]
Ma mot [Nm]
cos ϕA
Ia at 400 V ±10% [A]
RZ Ø [mm]
MT 71 D 8
0.4
0.77
0.20
1.2
0.77
0.60
10
MT 80 K 8
0.6
0.77
0.30
1.8
0.77
0.90
12
MT 80 N 8
0.8
0.75
0.31
2.4
0.75
0.93
12
MT 90 S 8
1.5
0.76
0.43
4.5
0.76
1.29
12
MT 100 LS 8
2.0
0.71
0.57
6.0
0.71
1.71
12
MT 100 L 8
2.5
0.70
0.66
7.5
0.70
1.98
12
MV 132 S 8
3.5
0.64
1.05
10.5
0.64
3.15
14
MV 160 M 8
5.0
0.53
2.0
15
0.53
6.0
22

Torque motors 900 rpm 60 Hz

 
Rating I for continuous duty S1
Rating II for intermittent operation S3/15% cdf or continuous duty with forced cooling fan
Only for gear unit mounting
Type
Ma mot [Nm]
cos ϕA
Ia at 460 V ±10% [A]
Ma mot [Nm]
cos ϕA
Ia at 460V ±10% [A]
RZ Ø [mm]
MT 71 D 8
0.4
0.75
0.22
1.2
0.75
0.66
10
MT 80 K 8
0.6
0.75
0.31
1.8
0.75
0.93
12
MT 80 N 8
0.8
0.71
0.33
2.4
0.71
0.99
12
MT 90 S 8
1.3
0.70
0.44
3.9
0.70
1.32
12
MT 100 LS 8
1.8
0.67
0.56
5.4
0.67
1.68
12
MT 100 L 8
2.3
0.65
0.68
6.9
0.65
2.04
12
MV 132 S 8
3.2
0.58
0.96
9.6
0.58
2.88
14
MV 160 M 8
4.5
0.48
2.15
13.5
0.48
6.45
22
 
  SEW EURODRIVE GEARBOXES


 
 
  Gearmotors and Frequency Inverters
  Standard Gearmotors:
  Motors:
  MOVITRAC® Frequency Inverter:
  MOVIDRIVE® Drive Inverter:
  Explosion-Proof Drives:
  Applications:
 
  Servo Technology
  Servo Gear Unit / Geared Servomotor:
  Motors:
  Servo Inverter:
 
  Drive System for Decentralized Installation
  Drives MOVIMOT® / MOVI-SWITCH®:
  Fieldbus Interface / Field Distributor MOVIMOT:
  MOVIFIT® Drive Control for Innovative Decentralized Installation:
  MOVIPRO® Drive Control:
  MOVITRANS® Contactless Energy Transfer:
  ECOFAST®-Compliant Drive Systems:
 
  Industrial gears
  Industrial gears:
 
  Other Products, Services and Tools
  Engineering / Installation Software:
  Control Technology:
  Operator Terminal / Visualization:
  Industrial Communication / Interfaces:
 
Tecnica Industriale Srl
S.P. 231 Km 1,110 - 70026 Modugno (Ba) - Italy
Tel +39 0805367090 - Fax +39 0805367091
E-mail: info@tecnicaindustriale.com
Send us an email

info@tecnicaindustriale.com
* Send us a fax

+ 39 0805367091
Call us

+39 080.5367090
   
Tecnica Industriale Srl Group
 
 

   

 
© 2010 Tecnica Industriale  Srl. All rights reserved.
Company
Profilo della Compagnia
Lavora con noi

Products
Rete Vendita
Schede tecniche

Brand
Brand distribuiti
New brand
Headquarters
Amministrazione
Sede logistica

News
Nuovi marchi distribuiti
Nuova Catalogazione

Info
Tecnica Industriale Srl
Posizioni disponibili
Catalogues
Ricerca per marchi
Ricerca per categorie

Industry Division
Guide prodotti
Tecnica Industriale srl

Automotive Division
Soluzioni automotive
Documentazione
Mission

Tecnica Industriale Srl is a company specialized in the distribution of industrial supplies.Present in about 70 countries are engaged in logistics and transportation of all types of industrial product.
   

© 2010 Tecnica Industriale Srl. All rights reserved. Created by www.omnilink.it