INDUSTRIAL PRODUCTS

[ select brand ] Abb Aron Beta Bonfiglioli * Brevini fluid power Brevini power trasmission Cemp Chiaravalli Chiorino Comintec Control techniques Corteco Danaher Dayco Debem Deca Effebi valvole Freudenberg simrit Fuji electric Gates Hiwin Hydr-app Italvibras Lenze John crane Marbett Marelli motori Mcc Mgm Mondeo valvole Motovario Radeco Rc trasmissioni Rexnord Rosta Saer elettropompe Samhydraulik Sew eurodrive Siti Skf Tellure rota Valeo Warner electric Wittenstein alpha

[ select category ] INDUSTRIAL EQUIPMENT brevini planetary gearboxes bonfiglioli gearboxes * sew eurodrive gearmotors siti gearboxes wittenstein alpha gearheads motovario gear reducers industrial gearboxes gearboxes mobile equipment industrial mixer ball screws bearings brakes and clutches brush brushless motors clutches centrifugal fans chucks conveyor belts electric motors electromagnets flights marbett food components gear reducers hose clamps industrial belts industrial pumps inverters linear units mechanical transmission mechanical turning mechanical seals modular systems molded brake lining pickling agent plastics pneumatic seals racks rollers for conveyors suspension units screw jacks selfaligning pillow blocks servoactuators automatic tighteners speed variators valves vibrators welders wheels for trolleys generic articles

INDUSTRIAL EQUIPMENT

AUTOMOTIVE EQUIPMENT

High power density
Long service life
R37 ... R167 Reduced backlash option
RM series, specially designed for agitating applications

Single-stage or multi-stage
Foot-mounted or flange-mounted
Foot-mounted and flange-mounted
Flange-mounted with extended bearing hub

	RX series (single-stage)
	For high output speeds, the exclusively single-stage gear units RX57 to RX107 offer compact solutions for your system design.

R series (two-stage and three-stage)

Our complete range of helical gearmotors provides the optimum size and power solution for every drive task. And for operators with a “weight-watching” issue, our multi-stage gear units provide something special: Thanks to their die-cast aluminum design, the models R07, R17 and R27 are three particularly efficient lightweights – ideal as satellite drives and for use in light machine constructions. Reduced backlash helical gear units are also available for particularly precise requirements.

	RM series
	RM gearmotors with extended output bearing hub are a special type of helical gearmotor. They were designed especially for agitating applications and allow for high overhung and axial loads and bending moments. The remaining data corresponds to that of standard helical gearmotors.

High power density
High permitted overhung loads
Multi-stage gear unit for low output speeds
F37 ... F157 Reduced backlash option

F series (two-stage and three-stage)

Our extra-slim parallel shaft helical gearmotors are the perfect solution when space is limited. The many different sizes and designs ensure that the gearmotors can be used in a wide variety of applications even under the most unfavorable conditions. SEW-EURODRIVE parallel shaft helical gearmotors are typically used in conveyor and materials processing applications. You can choose from foot-mounted, flange-mounted or shaft-mounted options. Reduced backlash parallel shaft helical gear units are also available on request for precise positioning tasks. Available versions Foot-mounted or flange-mounted B5 or B14 Flange-mounted Solid or hollow shaft Hollow shaft with keyed connection, shrink disc, splined hollow shaft or TorqLOC®

High power density
Wear-free
Long service life
> 96% gear unit efficiency
Multi-stage gear unit for low output speeds
Reduced backlash option in all sizes

K series (three-stage)

Helical-bevel gear units from SEW-EURODRIVE provide a high degree of efficiency of over 96% in both torque directions and at all input speeds. With performance designed to last – high-endurance gearing enables high-torque, wear-free operation. With our remarkably efficient helical-bevel gearmotors, you have energy-saving angular gear drives at your fingertips. As they also have a long maintenance-free service life, they can be used in every application with AC asynchronous motors, asynchronous and synchronous servomotors. A reduced backlash version is available for precise positioning tasks. Available versions Foot-mounted or flange-mounted B5 or B14 flange-mounted Solid or hollow shaft Hollow shaft with keyed connection, shrink disc, splined hollow shaft or TorqLOC®

Economical operation
Low noise
High permitted overhung loads

S series

SEW-EURODRIVE helical-worm gear units are helical/helical-worm combinations, so they are more efficient than normal helical-worm gear units. Due to their outstanding efficiency, these drives can be used in every industrial sector and tailored to individual torque and speed requirements. The reduction ratios afforded by the helical-worm gear stage and the low noise levels during operation make these gearmotors ideal low-cost solutions for simple applications. Available versions Foot-mounted or flange-mounted B5 or B14 Flange-mounted Solid or hollow shaft Hollow shaft with keyed connection, shrink disc, splined hollow shaft or TorqLOC®

Low noise
Economical operation
Life-long lubrication
Light aluminum housing

W series

SPIROPLAN® gearmotors are robust right-angle gearmotors with SPIROPLAN® gearing. They have three main differences from the helical-worm gear units: the material combination of the steel-on-steel gearing, the special tooth meshing relationships and the aluminum housing. These features make SPIROPLAN® gearmotors very quiet, wear-free and lightweight. The particularly short design and the aluminum housing make for very compact and lightweight drive solutions. The wear-free gearing and the life-long lubrication facilitate long periods of maintenance-free operation. As the oil fill is independent of the mounting position, SPIROPLAN® gearmotors can be installed in any mounting position without altering the quantity of oil. Identical hole spacing in the foot and face as well as the equal shaft height to both provides you with diverse mounting options. Available versions Foot-mounted or flange-mounted B5 or B14 Flange-mounted

Increased starting torque
Large permitted overhung loads of the reduction gear units
Large number of finely spaced gear ratios of the reduction gear unit, depending on size
Choice of manual or remote speed control
Intuitive operation

VU/VZ series

The VU and VZ designs of the VARIBLOC® wide V-belt variable speed gearmotors are used with power ranges of up to 45 kW. Typical speed setting ranges are 1:4, 1:6 and 1:8. The U- or Z-shaped power flow and numerous combination possibilities with reduction gear units mean that these speed gearmotors can be supplied in a broad range of designs. They can easily be tailored to the most diverse machine structures.

	D series
	Series D VARIMOT® friction disk variable speed gearmotors are intended for power ranges up to 11 kW and speed setting ranges 1:4 or 1:5. The contact pressure between the driving pulley and the friction ring required for torque transmission is set automatically. The speed control can be adjusted even when the gearmotor is at a standstill.

Minimal space requirement
Flexible and robust design
Wide range of combinations with low noise operation

DT / DV series

DT/DV series AC motors and AC brake motors are the ideal match for SEW-EURODRIVE standard gear units. Our wide range of variants ensures that we have the right motor for your application, whether you need 2-pole, 4-pole, 6-pole or 8-pole or multi-speed. SEW-EURODRIVE brake motors have integrated DC safety disc brakes. The brake control is installed in the terminal box as standard, but is also available in control cabinet version as an option. The patented two-coil brake system facilitates high starting frequency and positioning accuracy with particularly short response and reaction times.

Motor power range from 0.25 kW to 1.5 kW (0.33 hp to 2.0 hp)
Smooth surface
No fan, pure convection cooling
Increased IP rating on motor enclosure
High corrosion and surface protection
Food grade gear oil as an option

DAS series

The beverage and food industry and the chemical and pharmaceutical industry place high hygiene demands on production facilities. The drive solutions used in the past made it very difficult to clean the production systems as thoroughly as required. Standard motors often come equipped with cooling fins and fans in which dirt can accumulate and germs and bacteria may be distributed in air swirls. The ASEPTIC motors of the DAS series have a smooth surface and are not equipped with fans.

Can be combined with tried and tested SEW-EURODRIVE modular system
Optimized control characteristics
Surpasses EFF1 (Europe) / NAEEEC/MEPS (Australia) / EPact (USA) / C390 (Canada) / NBR7094 (Brazil)

	DTE / DVE series
	Surprisingly few mechanical engineers and operators know that over 95% of a motor’s life cycle costs are energy costs. This is why only few plants are fitted with energy efficient motors. In 2002, SEW-EURODRIVE became the first company in the world to succeed in using die-cast copper technology in industrial high-volume series production. The result: Highly energy efficient motors at a surprisingly competitive price that comply with all applicable European and international standards. DTE and DVE series 4-pole motors surpass the EFF1 limit value and are marked as follows:
	Country	Efficiency logo
	Australia / New Zealand	EFF1
	EU Europe	EFF1
	North America	CSAe, ee
	Brazil	“Procel”

All retaining screws that are loosened during operation are made of stainless steel.
The nameplates are made of stainless steel. Various motor parts are coated with a top coat.
Flange contact surfaces and shaft ends are treated with a temporary anti-corrosion agent.
Additional measures for brake motors.

Additional options
Plug connector type IS	Optional for DR/DT/DV series AC motors and AC brakemotors. The IS plug connector is delivered instead of the standard terminal box. The upper section of the IS plug connector (mating connector) is included in the scope of delivery. The IS plug connector is particularly compact and offers the following connection options: Motor, single-speed or two-pole multi-speed Brake Temperature monitoring (TF or TH)
Installed plug connector type AB / AD / AM	Optional for DR/DT/DV series AC motors and AC brakemotors. The mounted AB.., AD.., and AM.. plug connector systems are based on the Han Modular® plug connector system made by Harting. AB.., AD.. and AM.. plug connectors can be used for connecting both ­single-speed motors and 2-pole multi-speed motors. With brakemotors, the brake control system can be either located in the terminal box or in the control cabinet. All versions of the brake control system are possible.
Installed plug connectors type AC / AS	Optional for DR/DT/DV series AC motors and AC brake motors. The installed AC.. and AS.. connector systems are based on the Han 10E/10ES connector system made by Harting. You can connect both motors with single speed and 2-pole multi-speed motors.
Plug connector type APG	Optional for DT/DV series AC motors and AC brake motors The APG plug connector is based on a plug manufactured by Phoenix Contact and ­consists of a four-part PlusCon VC. The mating connector is not included in the scope of delivery. The plug connector enables an easily disconnectable hybrid cable connection between the motor/brakemotor and an MF.../MM../Z.8A series field distributor with an integrated MOVIMOT® inverter or a suitable third-party decentralized control module.
Mounted plug connector type ASK1	Optional for DT/DV series AC motors and AC brake motors The installed ASK1 plug connector system is based on the Han 10ES plug connector system made by Harting. The plug connector is located at the side of the terminal box. The ASK1 plug connector system is used for ECOFAST®-compliant AC motors and AC brakemotors.
Carrier plate for ASK1	Optional for DT/DV series AC motors and AC brakemotors. If you want motor-integrated installation of an ECOFAST®-compliant switchgear or control unit, you require a carrier plate onto which the switchgear or ­control unit is plugged. The carrier plate can be used regardless of the motor size.
Proximity sensor type NV	Optional for DT/DV series AC motors and AC brakemotors. SEW-­EURODRIVE proximity sensors are a simple and inexpensive means of monitoring whether the motor is turning. If a two-track proximity sensor is used, the direction of rotation of the motor can also be detected. Proximity sensors are mounted on the side of the fan guard and so do not increase the length of the motor.
Incremental encoder type EH / ES / EV	Optional for DR/DT/DV series AC motors and AC brakemotors. SEW-EURODRIVE incremental encoders output 1024 signals/revolution. They have two signal tracks and one index signal track. Incremental encoders are available as hollow shaft encoders, spreadshaft encoders and solid shaft encoders with coupling. Signal output: TTL or sin/cos.
Encoder mounting device for type ES / EV	Optional for DT/DV series AC motors and AC brakemotors. The motors can be equipped with various encoder attachment fittings for mounting devices from different manufacturers. Mounting devices for encoders are intended for spreadshaft encoders with an 8 mm or 10 mm center bore and for solid shaft encoders (synchronous flange).
Absolute encoder type AV1Y / AV1H	SEW-EURODRIVE AV1Y and AV1H absolute encoders are combination encoders. They contain a multi-turn absolute encoder and a high-­resolution sinusoidal encoder. You can choose between an SSI interface or a HIPERFACE® interface for data transmission of absolute values. The AV1H absolute encoder has an electronic nameplate.
Forced cooling fan type VR / VS / V	DT/DV series AC motors and AC brakemotors can be equipped with a forced cooling fan on request. A forced cooling fan is usually not required for mains operated motors in continuous duty. SEW-EURODRIVE recommends a forced cooling fan for the following applications: Drives with high starting frequency Drives with additional flywheel mass Z (flywheel fan) Inverter drives with a setting range ≥ 1:20 Inverter drives that must also generate rated torque at low speeds or even when stationary
Additional flywheel mass Z	DR/DT/DV series AC motors and AC brakemotors can be equipped with additional flywheel mass Z (flywheel fan) to facilitate smoother starting and braking response from mains-operated motors. The fan gives the motor an additional mass moment of inertia JZ. The flywheel fan replaces the normal fan and does not affect the external dimensions of the motor.
RS backstop	DT/DV series AC motors and AC brakemotors can be equipped with a backstop if required. The backstop is used for protecting equipment against reverse movement when the motor is switched off.
Protection canopy C	Optional for DR/DT/DV series AC motors and AC brakemotors. Liquids and/or solid foreign objects can penetrate the air inlet openings of motors when motors are mounted vertically with their input shaft pointing downwards.
Low noise fan guard	Optional for DT/DV series AC motors and AC brakemotors. Motor noise is amplified by the drive fan guards. The low noise fan guard reduces the noise level by approximately 3 dB(A) when compared with the standard version.
WPU Smooth pole-change unit	For DR/DT/DV series multi-speed AC motors and AC brakemotors. ­Normal multi-speed motors cannot switch from high to low speed without jerks unless special measures are taken. The WPU smooth pole-change unit completes this task electronically and requires minimal wiring work.

High-quality system components
High power range across all supply voltage ranges
High EMC protection
Simple operation and startup
Excellent price/performance ratio

	MOVITRAC® B
	Compact and inexpensive frequency inverter for power range of 0.25 to 75 kW. 1-phase and 3-phase mains connection for AC 230 V and 3-phase mains connection for AC 400 to 500 V.

Wide voltage range
High overload capacity
4Q capability due to integrated brake chopper installed as standard
Compact unit design
Extensive functionality and features

	MOVIDRIVE® MDX 60/61B
	High-performance drive inverter for dynamic drives in power range 0.55 to 160 kW (0.74 to 215 hp). Great diversity of applications due to extensive expansion options with technology and communication options. 3-phase mains connection for AC 230 V and AC 400 to 500 V.

High functionality and user-friendly operator interface.
All you have to do is enter the parameters needed for the application.
Guided parameter setting process instead of complicated programming.
No lengthy training or familiarization, which means quick project planning and startup.
All motions are controlled directly in the MOVIDRIVE^®.
Decentralized concepts can be implemented more easily