| |
|
|
|
|
|
» JOINTING EQUIPMENT
|
 |
| |
Joint equipment
The ENGINEERING DIVISION of CHIORINO designs and supplies equipment for making endless conveyor and transmission
belts. This booklet illustrates LIGHTWEIGHT EQUIPMENT and equipment suitable for JOINTING ON SITE, which are available ex-stock.
CHIORINO can also supply for the PROFESSIONAL WORKSHOPS::
cutting benches;
cutting and slitting machines;
skiving machines and splitting machines (lappers);
punching machines and workshop presses;
hot-air welders and high frequency machines for applying profiles and
guides.
To obtain further information on the above equipment please contact the CHIORINO Technical
Support.
|
|
|
|
» FAST JOINT EQUIPMENT
|
|
 |
Fast Joint series
CHIORINO has designed fast and easy to make jointing systems obtained by using purpose designed
equipment.
Features of the CHIORINO fast joint systems:
- they can be executed on conveyor and transmission belts having thermoplastic material cover, up to 200 mm wide;
- no use of cements;
- they guarantee ease of use and speed of execution; a few minutes, using the equipment below and following the jointing procedures ensuring quality
joints.
The fast joint systems differ according to the belt types and their
width:
|
|
Nuova pinza a caldo Fast Joint P50 FJ per nastri e cinghie termoplastiche
|
Thermoplastic polyurethane belts without textile support
(EL series).
The type of joint suggested is OVERLAPPED, using the following
equipment:
- up to 50 mm wide with the press P50 T;
- up to 80 mm wide with the press P120 T;
- up to 200 mm wide with the press EL250.
This method does not require any preparation like finger punching.
Thermoplastic polyurethane belts with textile support, up to 50 mm wide.
The type of joint suggested is MICRO Z FINGERS, using the following
equipment:
- finger puncher F50 M;
- press P50 T.
Thermoplastic polyurethane belts with textile support, up to 80 mm wide.
The type of joint suggested is SINGLE Z FINGERS, using the following
equipment:
- finger puncher F80 ME;
- press P120 T.
|
|
|
|
»
PUNCHERS F700 M
|
|
| |
Puncher - Type F700 M
Hydraulic operated puncher, for SINGLE Z fingers on belts up to a maximum of 5 mm
thickness.
|
|
|
|
|
|
» SKIVERS
|
|
| |
Skiver - Type B80 D
Hand operated plate skiver for conveyor and transmission belts up to 80 mm wide and a maximum of 5 mm thickness. |
|
|
|
|
|
| |
Skiver - Type B100 R / RM
Roller skiver without motor (B100 R) or with motor (B100 RM) for conveyor and transmission belts up to 100 mm wide and a maximum of 5 mm thickness. |
|
|
|
|
|
| |
Skiver - Type B300 SA
Skiver ideal to obtain accurate skives with preset angle on belts and belting up to 300 mm wide with 90 ° straight cut and max. thickness 10 mm.
|
|
|
|
|
|
»
WELDERS
|
|
| |
Welder - Type S15
Welder for jointing PU round and V-belts. It can be supplied with clamp and pliers. |
|
|
|
|
|
» PRESSES
|
|
| |
Press - Type P100 K
Press for vulcanizing skived conveyor and transmission belts up to 100 mm wide and a maximum of 5,5 mm thickness. |
|
|
|
|
|
| |
Press - Type P200
Press for vulcanizing skived polyurethane and PVC conveyor and transmission belts up to 200 mm wide. |
|
|
|
|
|
» PRESSES FOR THERMOPLASTIC BELTS
|
|
| |
Presses - Type P300÷1000 L
Presses with cooling system for vulcanizing thermoplastic and thermosetting belts. |
|
|
|
|
|
| |
Presses - Type P1200÷3400 L
Presses with cooling system for vulcanizing thermoplastic and thermosetting belts. |
|
|
|
|
|
| |
Presses - Type P400÷800 L S
Presses for vulcanizing conveyor and transmission belts with a minimum inside circumference of 400 mm. |
|
|
Send us an email
Send us a fax
Call us