Fixed mixer with internal stand and locking device for fitting to an open or partially-covered tank.
Designed for the water treatment sector, irrigation, etc. These mixers can handle products with a maximum density of 40°Bé and viscosity not exceeding 1.500 cps at atmospheric pressure. 
Usable in cylindrical drums of a max. 1000 litres capacity.

Construction materials	Aisi 316
Motor	220/380 220 S.ph.
Lenght column/shaft	850
C.V./HP	0,33
RPM	940
Ø impeller mm	120
impeller in	Aisi 316
Coated shaft	Aisi 316

Fixed mixer with internal stand and locking device for fitting to an open or partially-covered tank.
Designed for the water treatment sector, irrigation, etc. These mixers can handle products with a maximum density of 40°Bé and viscosity not exceeding 1.500 cps at atmospheric pressure. 
Usable in cylindrical drums of a max. 1000 litres capacity.

Construction materials	Aisi 316
Motor	220/380 220 S.ph.
Lenght column/shaft	1000
C.V./HP	0,33
RPM	940
Ø impeller mm	120
impeller in	Aisi 316
Coated shaft	Aisi 316

Fixed mixer with internal stand and locking device for fitting to an open or partially-covered tank.
Designed for the water treatment sector, irrigation, etc. These mixers can handle products with a maximum density of 40°Bé and viscosity not exceeding 1.500 cps at atmospheric pressure. 
Usable in cylindrical drums of a max. 1000 litres capacity.

Construction materials	Aisi 316
Motor	220/380 220 S.ph.
Lenght column/shaft	850
C.V./HP	0,33
RPM	940
Ø impeller mm	120
impeller in	Aisi 316
Coated shaft	Aisi 316

Fixed mixer with internal stand and locking device for fitting to an open or partially-covered tank.
Designed for the water treatment sector, irrigation, etc. These mixers can handle products with a maximum density of 40°Bé and viscosity not exceeding 1.500 cps at atmospheric pressure. 
Usable in cylindrical drums of a max. 1000 litres capacity.

Construction materials	Aisi 316
Motor	220/380 220 S.ph.
Lenght column/shaft	1000
C.V./HP	0,33
RPM	940
Ø impeller mm	120
impeller in	Aisi 316
Coated shaft	Aisi 316

Fixed mixer with internal stand and locking device for fitting to an open or partially-covered tank.
Designed for the water treatment sector, irrigation, etc. These mixers can handle products with a maximum density of 40°Bé and viscosity not exceeding 1.500 cps at atmospheric pressure. 
Usable in cylindrical drums of a max. 1000 litres capacity.

Construction materials	Aisi 316
Motor	220/380 220 S.ph.
Lenght column/shaft	1000
C.V./HP	0,33
RPM	940
Ø impeller mm	120
impeller in	Aisi 316
Coated shaft	Aisi 316

Fixed mixer with internal stand and locking device for fitting to an open or partially-covered tank.
Designed for the water treatment sector, irrigation, etc. These mixers can handle products with a maximum density of 40°Bé and viscosity not exceeding 1.500 cps at atmospheric pressure. 
Usable in cylindrical drums of a max. 1000 litres capacity.

Construction materials	Aisi 316
Motor	220/380 220 S.ph.
Lenght column/shaft	1200
C.V./HP	0,33
RPM	940
Ø impeller mm	120
impeller in	Aisi 316
Coated shaft	Aisi 316

Fixed mixer with internal stand and locking device for fitting to an open or partially-covered tank.
Designed for the water treatment sector, irrigation, etc. These mixers can handle products with a maximum density of 40°Bé and viscosity not exceeding 1.500 cps at atmospheric pressure. 
Usable in cylindrical drums of a max. 3000 litres capacity.

Construction materials	Aisi 316
Motor	220/380 220 S.ph.
Lenght column/shaft	1000
C.V./HP	0,75
RPM	940
Ø impeller mm	160
impeller in	Aisi 316
Coated shaft	Aisi 316

Fixed mixer with internal stand and locking device for fitting to an open or partially-covered tank.
Designed for the water treatment sector, irrigation, etc. These mixers can handle products with a maximum density of 40°Bé and viscosity not exceeding 1.500 cps at atmospheric pressure. 
Usable in cylindrical drums of a max. 3000 litres capacity.

Construction materials	Aisi 316
Motor	220/380 220 S.ph.
Lenght column/shaft	1000
C.V./HP	0,75
RPM	940
Ø impeller mm	160
impeller in	Aisi 316
Coated shaft	Aisi 316

Fixed mixer with internal stand and locking device for fitting to an open or partially-covered tank.
Designed for the water treatment sector, irrigation, etc. These mixers can handle products with a maximum density of 40°Bé and viscosity not exceeding 1.500 cps at atmospheric pressure. 
Usable in cylindrical drums of a max. 3000 litres capacity.

Construction materials	Aisi 316
Motor	220/380 220 S.ph.
Lenght column/shaft	1000
C.V./HP	0,75
RPM	940
Ø impeller mm	160
impeller in	Aisi 316
Coated shaft	Aisi 316

Fixed mixer with internal stand and locking device for fitting to an open or partially-covered tank.
Designed for the water treatment sector, irrigation, etc. These mixers can handle products with a maximum density of 40°Bé and viscosity not exceeding 1.500 cps at atmospheric pressure. 
Usable in cylindrical drums of a max. 3000 litres capacity.

Construction materials	Aisi 316
Motor	220/380 220 S.ph.
Lenght column/shaft	1200
C.V./HP	0,75
RPM	940
Ø impeller mm	160
impeller in	Aisi 316
Coated shaft	Aisi 316

Fixed mixer with internal stand and locking device for fitting to an open or partially-covered tank.
Designed for the water treatment sector, irrigation, etc. These mixers can handle products with a maximum density of 40°Bé and viscosity not exceeding 1.500 cps at atmospheric pressure. 
Usable in cylindrical drums of a max. 3000 litres capacity.

Construction materials	Aisi 316
Motor	220/380 220 S.ph.
Lenght column/shaft	1200
C.V./HP	0,75
RPM	940
Ø impeller mm	160
impeller in	Aisi 316
Coated shaft	Aisi 316

Fixed mixer with internal stand and locking device for fitting to an open or partially-covered tank.
Designed for the water treatment sector, irrigation, etc. These mixers can handle products with a maximum density of 40°Bé and viscosity not exceeding 1.500 cps at atmospheric pressure. 
Usable in cylindrical drums of a max. 3000 litres capacity.

Construction materials	Aisi 316
Motor	220/380 220 S.ph.
Lenght column/shaft	1500
C.V./HP	0,75
RPM	940
Ø impeller mm	160
impeller in	Aisi 316
Coated shaft	Aisi 316

Fixed mixer with internal stand and locking device for fitting to an open or partially-covered tank.
Designed for the water treatment sector, irrigation, etc. These mixers can handle products with a maximum density of 40°Bé and viscosity not exceeding 1.500 cps at atmospheric pressure. 
Usable in cylindrical drums of a max. 3000 litres capacity.

Construction materials	Aisi 316
Motor	220/380 220 S.ph.
Lenght column/shaft	1500
C.V./HP	0,75
RPM	940
Ø impeller mm	160
impeller in	Aisi 316
Coated shaft	Aisi 316

Fixed mixer with internal stand and locking device for fitting to an open or partially-covered tank.
Designed for the water treatment sector, irrigation, etc. These mixers can handle products with a maximum density of 40°Bé and viscosity not exceeding 1.500 cps at atmospheric pressure. 
Usable in cylindrical drums of a max. 3000 litres capacity.

Construction materials	Aisi 316
Motor	220/380 220 S.ph.
Lenght column/shaft	1800
C.V./HP	0,75
RPM	940
Ø impeller mm	160
impeller in	Aisi 316
Coated shaft	Aisi 316

Fixed mixer with internal stand and locking device for fitting to an open or partially-covered tank.
Designed for the water treatment sector, irrigation, etc. These mixers can handle products with a maximum density of 40°Bé and viscosity not exceeding 1.500 cps at atmospheric pressure. 
Usable in cylindrical drums of a max. 3000 litres capacity.

Construction materials	Aisi 316
Motor	220/380 220 S.ph.
Lenght column/shaft	2000
C.V./HP	0,75
RPM	940
Ø impeller mm	160
impeller in	Aisi 316
Coated shaft	Aisi 316

Fixed mixer with internal stand and locking device for fitting to an open or partially-covered tank.
Designed for the water treatment sector, irrigation, etc. These mixers can handle products with a maximum density of 40°Bé and viscosity not exceeding 1.500 cps at atmospheric pressure. 
Usable in cylindrical drums of a max. 5000 litres capacity.

Construction materials	Aisi 316
Motor	220/380 220 S.ph.
Lenght column/shaft	1200
C.V./HP	1,5
RPM	940
Ø impeller mm	200
impeller in	Aisi 316
Coated shaft	Aisi 316

Fixed mixer with internal stand and locking device for fitting to an open or partially-covered tank.
Designed for the water treatment sector, irrigation, etc. These mixers can handle products with a maximum density of 40°Bé and viscosity not exceeding 1.500 cps at atmospheric pressure. 
Usable in cylindrical drums of a max. 5000 litres capacity.

Construction materials	Aisi 316
Motor	220/380 220 S.ph.
Lenght column/shaft	1500
C.V./HP	1,5
RPM	940
Ø impeller mm	200
impeller in	Aisi 316
Coated shaft	Aisi 316

Fixed mixer with internal stand and locking device for fitting to an open or partially-covered tank.
Designed for the water treatment sector, irrigation, etc. These mixers can handle products with a maximum density of 40°Bé and viscosity not exceeding 1.500 cps at atmospheric pressure. 
Usable in cylindrical drums of a max. 5000 litres capacity.

Construction materials	Aisi 316
Motor	220/380 220 S.ph.
Lenght column/shaft	1800
C.V./HP	1,5
RPM	940
Ø impeller mm	200
impeller in	Aisi 316
Coated shaft	Aisi 316

Fixed mixer with internal stand and locking device for fitting to an open or partially-covered tank.
Designed for the water treatment sector, irrigation, etc. These mixers can handle products with a maximum density of 40°Bé and viscosity not exceeding 1.500 cps at atmospheric pressure. 
Usable in cylindrical drums of a max. 5000 litres capacity.

Construction materials	Aisi 316
Motor	220/380 220 S.ph.
Lenght column/shaft	2000
C.V./HP	1,5
RPM	940
Ø impeller mm	200
impeller in	Aisi 316
Coated shaft	Aisi 316

PP and PVDF mixers for processing acids. No stand with locking device for tank installation. Watertight, this being achieved by means of a fixed ceramic part and V-ring seal in the top section and an O-ring fitted to the bolt-on impeller. Series E L. 600/800 mm usable in cylindrical drums of a max. 400 litres capacity. Series E L. 1000/1200 mm usable in cylindrical drums of a max. 1000 litres capacity. Series EH usable in cylindrical drums of a max. 3000 litres capacity.

Construction materials	PP/PVDF
Motor	220 S.ph. 220/380
Lenght column/shaft	600
C.V./HP	1/6
RPM	940
impeller in	PP, PVDF
Coated shaft	PP, PVDF

PP and PVDF mixers for processing acids. No stand with locking device for tank installation. Watertight, this being achieved by means of a fixed ceramic part and V-ring seal in the top section and an O-ring fitted to the bolt-on impeller. Series E L. 600/800 mm usable in cylindrical drums of a max. 400 litres capacity. Series E L. 1000/1200 mm usable in cylindrical drums of a max. 1000 litres capacity. Series EH usable in cylindrical drums of a max. 3000 litres capacity.

Construction materials	PP/PVDF
Motor	220 S.ph. 220/380
Lenght column/shaft	800
C.V./HP	1/6
RPM	940
impeller in	PP, PVDF
Coated shaft	PP, PVDF

PP and PVDF mixers for processing acids. No stand with locking device for tank installation. Watertight, this being achieved by means of a fixed ceramic part and V-ring seal in the top section and an O-ring fitted to the bolt-on impeller. Series E L. 600/800 mm usable in cylindrical drums of a max. 400 litres capacity. Series E L. 1000/1200 mm usable in cylindrical drums of a max. 1000 litres capacity. Series EH usable in cylindrical drums of a max. 3000 litres capacity.

Construction materials	PP/PVDF
Motor	220 S.ph. 220/380
Lenght column/shaft	1000
C.V./HP	1/3
RPM	940
impeller in	PP, PVDF
Coated shaft	PP, PVDF

PP and PVDF mixers for processing acids. No stand with locking device for tank installation. Watertight, this being achieved by means of a fixed ceramic part and V-ring seal in the top section and an O-ring fitted to the bolt-on impeller. Series E L. 600/800 mm usable in cylindrical drums of a max. 400 litres capacity. Series E L. 1000/1200 mm usable in cylindrical drums of a max. 1000 litres capacity. Series EH usable in cylindrical drums of a max. 3000 litres capacity.

Construction materials	PP/PVDF
Motor	220 S.ph. 220/380
Lenght column/shaft	1200
C.V./HP	3/4
RPM	940
impeller in	PP, PVDF
Coated shaft	PP, PVDF

PP and PVDF mixers for processing acids. No stand with locking device for tank installation. Watertight, this being achieved by means of a fixed ceramic part and V-ring seal in the top section and an O-ring fitted to the bolt-on impeller. Series E L. 600/800 mm usable in cylindrical drums of a max. 400 litres capacity. Series E L. 1000/1200 mm usable in cylindrical drums of a max. 1000 litres capacity. Series EH usable in cylindrical drums of a max. 3000 litres capacity.

Construction materials	PP/PVDF
Motor	220 S.ph. 220/380
Lenght column/shaft	1400
C.V./HP	3/4
RPM	940
impeller in	PP, PVDF
Coated shaft	PP, PVDF

Fixed mixer without stand for installation above open or partially-covered vessels.
2- or 3-stage reduction gearbox for slower rotation speeds. For a very slow mixing of fluids (e.g.: non foaming fluids). It is utilized for very small drums.

Construction materials	Aisi 316
Motor	220 S.ph. 220/380
Lenght column/shaft	1000
C.V./HP	1/8
RPM	118
Ø impeller mm	160
impeller in	Aisi 316
Coated shaft	Aisi 316

Fixed mixer without stand for installation above open or partially-covered vessels.
2- or 3-stage reduction gearbox for slower rotation speeds. For a very slow mixing of fluids (e.g.: non foaming fluids). It is utilized for very small drums.

Construction materials	Aisi 316
Motor	220 S.ph. 220/380
Lenght column/shaft	1200
C.V./HP	1/8
RPM	118
Ø impeller mm	200
impeller in	Aisi 316
Coated shaft	Aisi 316

Fixed mixer without stand for installation above open or partially-covered vessels.
2- or 3-stage reduction gearbox for slower rotation speeds. For a very slow mixing of fluids (e.g.: non foaming fluids). It is utilized for very small drums.

Construction materials	Aisi 316
Motor	220 S.ph. 220/380
Lenght column/shaft	1000
C.V./HP	1/8
RPM	86
Ø impeller mm	200
impeller in	Aisi 316
Coated shaft	Aisi 316

Fixed mixer without stand for installation above open or partially-covered vessels.
2- or 3-stage reduction gearbox for slower rotation speeds. For a very slow mixing of fluids (e.g.: non foaming fluids). It is utilized for very small drums.

Construction materials	Aisi 316
Motor	220 S.ph. 220/380
Lenght column/shaft	1200
C.V./HP	1/8
RPM	86
Ø impeller mm	200
impeller in	Aisi 316
Coated shaft	Aisi 316

Fixed mixer without stand for installation above open or partially-covered vessels.
2- or 3-stage reduction gearbox for slower rotation speeds. For a very slow mixing of fluids (e.g.: non foaming fluids). It is utilized for very small drums.

Construction materials	Aisi 316
Motor	220/380
Lenght column/shaft	1000
C.V./HP	1/8
RPM	35
Ø impeller mm	600
impeller in	Aisi 316
Coated shaft	Aisi 316

Fixed mixer without stand for installation above open or partially-covered vessels.
2- or 3-stage reduction gearbox for slower rotation speeds. For a very slow mixing of fluids (e.g.: non foaming fluids). It is utilized for very small drums.

Construction materials	Aisi 316
Motor	220/380
Lenght column/shaft	1200
C.V./HP	1/8
RPM	35
Ø impeller mm	600
impeller in	Aisi 316
Coated shaft	Aisi 316

Fixed mixer without stand for installation above open or partially-covered vessels.
2- or 3-stage reduction gearbox for slower rotation speeds. For a very slow mixing of fluids (e.g.: non foaming fluids). It is utilized for very small drums.

Construction materials	PP
Motor	220 S.ph. 220/380
Lenght column/shaft	1000
C.V./HP	1/8
RPM	118
Ø impeller mm	160
impeller in	PP
Coated shaft	PP

Fixed mixer without stand for installation above open or partially-covered vessels.
2- or 3-stage reduction gearbox for slower rotation speeds. For a very slow mixing of fluids (e.g.: non foaming fluids). It is utilized for very small drums.

Construction materials	PP
Motor	220 S.ph. 220/380
Lenght column/shaft	1200
C.V./HP	1/8
RPM	118
Ø impeller mm	160
impeller in	PP
Coated shaft	PP