| |
 |
 SMALL Standard |
|
| |
 |
|
SMALL Standard
Threaded Small Diameter Check Valves
Technical Features:
• Manufacturing process: machined/pressed stainless steel
• Body valve and metallic parts in stainless steel Aisi 304 or Aisi 316
• Seal ring: NBR or FPM
• Threaded ends: UNI ISO 228 female
• Welded joints: tig method without any additional material
• Opening pressure: Min. 0,025 bar Max. 0,035 bar
• Hydraulic test: compressed air at 0,2 bar on each valve
• Nominal working pressure: 16 bar
• Working temperature:
-25°C - +90°C (with NBR seal)
-20°C - +150°C (with FPM seal)
• Available sizes: 1/4" - 3/8" - 1/2" |
|
| |
|
| SMALL with Reinforced Pin |
|
| |
 |
|
SMALL with Reinforced Pin
For Use with Gas or Steam
Technical Features:
• Body valve and metallic parts in stainless steel Aisi 304
• Seal ring: FPM
• Flow control disc: stainless steel Aisi 316
with reinforced welding between guiding pin and disc
• Available sizes: 1/4” - 3/8” - 1/2” |
|
| |
|
| SMALL for Drinkable Water |
|
| |
 |
|
SMALL for Drinkable Water
In Conformity with UNI EN 1074-3
Technical Features:
• Body valve and metallic parts in stainless steel Aisi 304
• Seal ring: EPDM with WRAS or equivalent approval
• Working temperature: -20°C - +110°C
• Available sizes: 1/4” - 3/8” - 1/2” |
|
| |
|
| SMALL Antipollution Checkable Model |
|
| |
 |
|
SMALL Antipollution Checkable Model
In Conformity with UNI EN 1717 (Type EA)
Technical Features:
• Body valve and metallic parts in stainless steel Aisi 304
• Seal ring: FPM
• Inspection hole: threaded 1/8” male on suction side
• Available sizes: 1/2” |
|
| |
|
| MONDEO |
|
|
|
|
|
|
|
|
Send us an email
Send us a fax
Call us
