| |
 |
 IDRJA-SMALL Filter |
|
| |
 |
|
IDRJA-SMALL Filter
Suction Screens for Check Valves
Technical Features:
• Net-filter: stainless steel Aisi 304 or Aisi 316
• Coupling: stainless steel Aisi 304 or Aisi 316
• Filtration:
-about 13 meshes (from 3/8” to 2”)
-about 8 meshes (from 2”1/2 to 4”)
• Threaded end: gas male UNI ISO 228
• Available sizes: from 3/8" to 4" |
|
| |
|
| AMITA Filter |
|
| |
 |
|
AMITA Filter
Suction Screens for Check Valves
Technical Features:
• Net-filter: stainless steel Aisi 304
• Coupling: PA (nylon)
• Threaded end: gas male UNI ISO 228
• Filtration: about 18 meshes
• Available sizes: from 3/8" to 4" |
|
| |
|
| Filter for Flanged Check Valves |
|
| |
 |
|
Filter for Flanged Check Valves
Suction Screens for Flanged Check Valves
Suction Screens for Flanged Check Valves
Technical Features:
• Net-filter: galvanized steel
• Nominal working pressure: 16 bar
• Working temperature: -10°C - + 100°C
• Available sizes: from 2" to 10" |
|
| |
|
| Brass Threaded "Y" Type Strainer |
|
| |
 |
|
Brass Threaded "Y" Type Strainer
Technical Features:
• Body valve and metallic parts: brass
• Seal ring: NBR
• Threaded ends: UNI ISO 228 gas female
• Nominal working pressure: 16 bar
• Working temperature: -20°C - +140°C
• Filtration: about 400 µ meshes
• Available sizes: from 1/2" to 2" |
|
| |
|
| LINIA |
|
| |
 |
|
LINIA
Stainless Steel In-line Filters
Technical Features:
• Manufacturing process: pressed stainless steel
• Body valve and metallic parts in stainless steel Aisi 304
• Surface treatment: degreasing, pickling and electropolishing
• Seal ring: NBR (FPM on request)
• Threaded ends: UNI ISO 228 gas female
• Welded joints: made with TIG method without any additional material
• Hydraulic test on welded joints: compressed air at 2 bar on each filter
• Nominal working pressure: 16 bar
• Working temperature:
-10°C - +90°C (with NBR seal)
-10°C - +150°C (with FPM seal)
• Filtration:
-about 40 meshes (from ½” to 1”)
-about 18 meshes (from 1”1/4 to 2”)
• Available sizes: from 1/2" to 2" |
|
| |
|
| SS Threaded "Y" Type Strainer |
|
| |
 |
|
SS Threaded "Y" Type Strainer
Technical Features:
• Body valve and metallic parts: stainless steel Aisi 316
• Seal: PTFE
• Threaded ends: UNI ISO 228 gas female
• Nominal working pressure: 40 bar
• Working temperature: -20°C - +200°C Filtro
• Available sizes: from 1/4" to 2" |
|
| |
|
| SS Flanged "Y" Type Strainer |
|
| |
 |
|
SS Flanged "Y" Type Strainer
Technical Features:
• Body valve and metallic parts: stainless steel Aisi 316
• Seal: PTFE
• Flanged ends UNI ISO 2278 PN 16
• Nominal working pressure: 16 bar
• Working temperature: -30°C - +240°C Misura
• Available sizes: from 1/2" to 4" |
|
| |
|
| MONDEO |
|
|
|
|
|
|
|
|
Send us an email
Send us a fax
Call us
