|
|
|
|
The keypad is used for startup and service. The
basic unit, MOVIDRIVE® MDX60/61B, does
not have a keypad as standard, but can be upgraded
as an option.
|
HIPERFACE® encoder card type DEH11B
|
The option-capable MOVIDRIVE® MDX61B
units can be equipped with the HIPERFACE®
encoder card type DEH11B. The encoder card
provides one input for the motor encoder and one
input for an external encoder, also referred to as
a synchronous encoder. The input for the external
encoder can also be used as an output for
incremental encoder simulation.
|
Resolver card type DER11B
|
Option-capable MOVIDRIVE® MDX61B units
can be equipped with resolver card type DER11B.
The resolver card offers one input for the
resolver as motor encoder and one input for an
external encoder, also referred to as a
synchronous encoder. The input for the external
encoder can also be used as an output for
incremental encoder simulation.
|
DEH21B absolute encoder interface
|
The option-capable MOVIDRIVE® MDX61B units can be
equipped with the DEH21B absolute encoder
interface. The absolute encoder interface offers
one input for the motor encoder and one input for
an external absolute encoder with SSI interface.
|
DIP11B absolute encoder interface
|
Option-capable MOVIDRIVE® MDX61B units
can be equipped with absolute encoder interface
type DIP11B. Option DIP11B supplements MOVIDRIVE®
with an SSI interface for absolute encoders.
|
Interface adapter type DWE11B/12B
|
The DWE11B/12B interface adapter in the form of an
adapter cable is used to connect HTL encoders
(single-ended HTL sensors and push-pull HTL
sensors) to the DEH11B HIPERFACE®
card.
|
Interface adapter type UWS21B
|
The UWS21B option converts RS-232 signals, for
example from the PC, into RS-485 signals. These
RS-485 signals can then be routed to the XT slot
of the MOVIDRIVE® basic unit.
|
Interface adapter type USB11A
|
Option USB11A enables a PC or laptop with a USB
interface to be connected to the XT slot of
MOVIDRIVE®. The USB11A interface
adapter supports USB 1.1 and USB 2.0.
|
Input/output card type DIO11B
|
Option-capable MOVIDRIVE® MDX61B units
can be equipped with input/output card type
DIO11B. The DIO11B option expands the binary and
analog inputs and outputs of the basic MOVIDRIVE®
unit.
|
PROFIBUS interface type DFP21B
|
Option-capable MOVIDRIVE® MDX61B units
can be equipped with PROFIBUS interface type
DFP21B. Option DFP21B is a 12-MBaud fieldbus
interface for the PROFIBUS-DP serial bus system.
The principal task of PROFIBUS-DP is to transmit
data in rapid cycles between central automation
equipment (PROFIBUS master) and decentralized
peripheral units (such as drive inverters).
|
INTERBUS interface type DFI11B
|
Option-capable MOVIDRIVE® MDX61B units
can be equipped with the INTERBUS interface type
DFI11B. The DFI11B option is an interface for the
non-proprietary and standardized serial INTERBUS
sensor/actuator bus system. INTERBUS functions
include a process data channel and parameter data
channel. These allow simple, user-friendly control
and configuration of intelligent actuators, such
as the MOVIDRIVE® drive inverter.
|
INTERBUS LWL interface type DFI21B
|
Option-capable MOVIDRIVE® MDX61B units
can be equipped with INTERBUS LWL interface type
DFI21B. The DFI21B option is an interface for the
non-proprietary and standardized serial INTERBUS
sensor/actuator bus system with fiber optic
cables. INTERBUS functions include a process data
channel and parameter data channel. These allow
simple, user-friendly control and configuration of
intelligent actuators, such as the MOVIDRIVE®
drive inverter.
|
Modubs / TCP DFE11B Ethernet interface
PROFINET I0 DFE12B / DFE32B Ethernet interface
EtherNet / IP DFE13B / DFE33B Ethernet interface
EtherCAT DFE24B
|
Option-capable MOVIDRIVE® DX61B units
can be equipped with
DFE11B/12B/13B/DFE24B/DFE32B/DFE33B Ethernet
interfaces. The
DFE11B/12B/13B/DFE24B/DFE32B/DFE33B options are
interfaces for connecting higher-level automation,
project planning and visualization systems via
Ethernet. You can use the
DFE11B/12B/13B/DFE32B/DFE33B options to
communicate directly with the inverters via
Ethernet to change parameters and programs and to
operate the MOVITOOLS® MotionStudio
software. An integrated Web server makes it
possible for the user to access diagnostic values
quickly and easily using a standard browser (e.g.
Internet Explorer). The DFE24B option provides a
synchronous connection for motion control
applications.
|
DFD11B DeviceNet interface
|
Option-capable MOVIDRIVE® MDX61B units
can be equipped with the DeviceNet interface type
DFD11B. The DFD11B option is an interface for
connecting to higher-level automation, project
planning and visualization systems via the
non-proprietary and standardized DeviceNet
fieldbus system.
|
CAN / CANopen interface type DFC11B
|
Option-capable MOVIDRIVE® MDX61B units
can be equipped with the CAN/CANopen interface
type DFC11B. The DFC11B option offers an
electrically isolated second CAN interface for
connecting to CANopen networks or for
communicating via the MOVILINK profile, which is
specially tailored to SEW-EURODRIVE units.
|
Absolute encoder interface type DIP11B
|
Option-capable MOVIDRIVE® MDX61B units
can be equipped with absolute encoder interface
type DIP11B. The DIP11B option supplements
MOVIDRIVE® with an SSI interface for
absolute encoders.
|
DRS11B synchronous operation board
|
The DRS11B option enables a group of motors to run
in angular synchronous operation or in an
adjustable proportional relationship. The basis
for synchronous operation is the continuous
comparison of the rotor angle positions of the
master and slave motors. The motors must be
equipped with encoders. The DRS11B option is
plugged into the expansion slot.
|
DCS21B / DCS31B safety monitor
|
Using the integrated DCS safety technology,
movement can be safely monitored in accordance
with EN954-1, safety category 3 and 4. Monitoring
movements instead of switching off the equipment
helps to optimize the process and offers
significant potential for savings.
|
PROFIsafe® PROFIBUS / PROFINET DFS11 /
12 / 21 / 22 secure fieldbus interface
|
Option-capable MOVIDRIVE® DX61B units
can be equipped with secure fieldbus interfaces
with the PROFIsafe protocol. These PROFIsafe
interfaces are available for PROFIBUS and PROFINET.
|
Controllers
MOVI-PLC® basic
DHP11B-TO / T1 / T2
MOVI-PLC® advanced
DHE41B
DHF41B
|
With the MOVI-PLC® basic DHP11B-Tx
controllers, SEW-EURODRIVE’s product portfolio
includes user-programmable controllers compliant
with the IEC 61131-3 and PLCopen standards for the
first time. This facilitates integration and
programming of logic and motion control in one
program and in accordance with international
standards. Various unit versions are available to
support the implementation of powerful technology
and application libraries.
|
Send us an email
Send us a fax
Call us
