|
|
MOVITOOLS® operating software
MotionStudio
|
The MOVITOOLS® MotionStudio program
package allows you to conveniently start up, set
parameters and run diagnostics for MOVITRAC®
B frequency inverters and MOVIDRIVE®
MDX60/61B drive inverters.
|
MDR60A regenerative power supply unit
|
The MDR60A regenerative power supply unit can be
used to supply multiple units with power using a
central power supply connection. In regenerative
mode, the power is fed back into the supply
system. By using MDR60A, you can save power and
installation costs.
|
|
|
BW series braking resistors are available for
operating MOVITRAC® B frequency
inverters and MOVIDRIVE® MDX60/61B
drive inverters as generators. Using an integrated
temperature sensor, the resistor can be protected
without external monitoring.
|
|
|
ND series line chokes increase inverter
overvoltage protection. This is an important
characteristic in rough industrial power supply
systems, especially if the inverter is installed
near a supply transformer.
|
|
|
NF type line filters are available for EMC
compliant installation as specified by EN 55011.
They suppress interference emissions on the line
side of inverters. These line filters ensure that
limit value class B is maintained on the supply
end.
|
|
|
HD series output chokes suppress interference
emitted from unshielded motor cables. They enable
the motor to meet limit value class B requirements
in accordance with EN 55011 in EMC-compliant
installations. Output chokes provide an
alternative to shielded motor cables in
EMC-compliant installations.
|
|
|
HF series output filters are sine filters that
smooth out inverter output voltage. Output filters
are used for group drives to suppress discharge
currents in motor cables and for long motor cables
to prevent voltage peaks.
|
Send us an email
Send us a fax
Call us
