Displacement:
from 6.06 to 225.1 cm³/rev
[from 0.37 to 13.73 in³/rev]
Flow range:
from 61 to 540 l/min
[from 16.1 to 142.6 U.S. gpm]
Output speed:
up to 5590 rpm (Max)
Pressure range:
from 350 to 450 bar (Max)
[from 5075 to 6525 psi (Max)]
Max torque:
1613 Nm [1189 lbf * ft]
The H1C series motors are bent axis, axial piston hydraulic units with fixed displacement for open and closed
circuit. A range of flangeable valves is also available. H1C series motors are available in metric and SAE mounting
configuration.
Displacement:
from 30 to 107.5 cm³/rev
[from 1.38 to 6.56 in³/rev]
Flow range:
from 135 to 322 l/min
[from 35.5 to 85 U.S. gpm]
Output speed:
up to 5590 rpm (Max)
Pressure range:
from 350 to 450 bar (Max)
[from 5100 to 6500 psi (Max)]
Max torque:
770 Nm [568 lbf * ft]
H1CR series are a family of fixed displacement motors, bent axis piston designed for operation in open and closed
circuit. H1CR series motors have a plug-in flange to be mounted on gear
boxes, to fit on track drives and winch applications. A range of flangeable
valves, for open and closed circuit is also available.
Displacement:
160.8 cm³/rev [9.81 in³/rev]
Flow range:
500 l/min [132 U.S. gpm]
Output speed:
up to 3100 rpm (Max)
Pressure range:
480 bar (Max) [6960 psi (Max)]
Max torque:
1230 Nm [906.5 lbf * ft]
SH7V series are a family of variable displacement motors, bent axis piston design for operation in both open and closed
circuit. The proven design incorporating the lens shape valve
plate, the high quality components and manufacturing techniques make able the SH7V series motors to provide up to 430 bar [6235 psi] continuous and 480 bar [6960 psi] peak performance. Fully laboratory tested and field
proven, these motors provide maximum efficiency and long life even at very bad filtering
conditions. Heavy duty bearings permit high radial and axial
loads. Versatile design includes a variety of control and shaft ends that will adapt the SH7V series motors to any application both industrial and mobile.
Displacement:
from 54.8 to 225.1 cm³/rev
[from 3.34 to 13.73 in³/rev]
Flow range:
from 214 to 563 l/min
[from 56.5 to 148 U.S. gpm]
Output speed:
up to 5100 rpm (Max)
Pressure range:
from 350 to 450 bar (Max)
[from 5075 to 6525 psi (Max)]
Max torque:
1613 Nm [1189 lbf * ft]
H2V series are variable displacement bent axis, axial piston motors for operation both in open and closed
circuit. The bearing of main shaft allows operation with both high radial and axial
loads. Several types of control and flangeable valves are
available. H2V series motors meet the requirements of the most demanding types of
applications. H2V series motors are available in metric and SAE
configuration.
Displacement:
from 54.8 to 107.5 cm³/rev
from 3.34 to 6.56 in³/rev
Flow range:
from 214 to 344 l/min
[from 56.5 to 90.5 U.S. gpm]
Output speed:
up to 5100 rpm (Max)
Pressure range:
from 350 to 450 bar (Max)
[from 5000 to 6500 psi (Max)]
Max torque:
770 Nm [568 lbf * ft]
H2VR series are a family of variable displacement motors, bent axis piston design, for operation in open and closed
circuit. H2VR series motors are plug-in motors for gear
boxes, for combinations such as track drives and winch
applications. Flangeable valves, for open and closed circuit are
available.
Displacement:
from 74.3 to 89.8 cm³/rev
[from 4.58 to 5.48 in³/rev]
Flow range:
225 l/min [59.4 U.S. gpm]
Output speed:
up to 3000 rpm (Max)
Pressure range:
from 320 to 350 bar (Max)
[from 4640 to 5075 psi (Max)]
Max torque:
500 Nm [368.5 lbf * ft]
H4C series units are a family of medium pressure fixed displacement axial piston motor, tilted plate design, suited for operation in closed
circuit. The motors are equipped with built in flushing valve for closed circuit
operation. 75 e 90 cm³/rev [4.58 and 5.48 in³/rev] displacements are available with SAE C - 4 bolts mounting flange.
Tecnica Industriale Srl è un'impresa integrata nella distribuzione di forniture per industrie. Presente in circa 70 paesi è impegnata nella logistica e trasporto di ogni tipo di prodotto industriale.
Send us an email
Send us a fax
Call us
